Description
X200 is a 12V input, maximum 200 Watts output DC-DC ATX PSU. It is a low-cost power supply choice for building your mini-ITX computer system. The 12V output rail is connected to the input 12V with two parallel P-channel MOSFETs, to reduce the resistance and therefore the current on 12V output rail is enlarged. A 8-bit microcontroller on board monitors the power ON signal from motherboard and controls the MOSFETs as well as the buck controllers to generate 12V, 5V, 3.3V and -12V for the motherboard. The X200 DC-ATX PSU is compatible with an entire range of mini-ITX motherboards as well as regular motherboards.
Input Characteristics
Minimum Input Voltage |
+11.80V |
Maximum Input Voltage |
+12.40V (over-voltage protecting occurs at +12.40V) |
Input Current Limit |
Yes |
Reverse Input Protection |
No |
The recommended input voltage is +12V.
Maximum Power Characteristics
Output Rail |
+3.3V |
+5V |
+12V1 |
+12V2 |
+5Vsb |
-12V |
Current Max |
10A |
8A |
10A |
|
2A |
0.05A |
Regulation |
1.50% |
1.50% |
1.50% |
|
1.50% |
5.00% |
Power |
73W |
120W |
|
10W |
0W |
Total Power |
200W @+25°C |
When operating at constant 120 Watts or more, forced air cooling is required. The +5VSB and +5V rails share the same output from a buck.
Cable Length
ATX Cable |
1 x 350mm |
EPS Cable |
1 x 400mm |
PCIE Cable |
1 x 400mm (EPS), 450mm (PCIE) |
SATA Cable |
1 x 250mm, 300mm, 350mm, 400mm (Molex) |
DC Power Input |
1 x 380mm |
Connector Quantity
ATX |
1 x 24Pin (20+4) |
EPS (CPU) |
1 x 8Pin (4+4) |
PCIE |
1 x 8Pin, 1 x 8Pin (6+2) |
SATA |
3 x SATA, 1 x Molex |
DC Power |
1 x DC IN (5.5x2.5), 1 x Molex Output (2x2) |
Additional Characteristics
Model |
PWR-D12V200Fx |
Switching Efficiency (VIN=12V) |
>94%, all rails combined, 50% load |
Operating Temperature |
0°C to +65°C |
MTBF |
200000 Hours |
Net Weight (PSU + Cables) |
0 grams |
PSU Dimension |
0mm (L) x 0mm (W) x 0mm(H) |
Mounting Hole Spacing |
|
Approvals |
No |