Description
X300 is a small size, fanless, high power DC-DC ATX PC power supply unit (PSU) designed for use with mini-ITX PC. X300 accepts 16-24V wide-range DC input and provides a cool, silent 300 Watts of power for small size PC designs. With the two current mode synchronous step-down controllers operating in 180° out of phase, X300 provides as much as 20 Amp current on the 12V output rail, facilitating using the high performance graphic card. The PSU is compatible with an entire range of mini-ITX motherboards as well as regular motherboards.
Block Diagram
Input Characteristics
| Minimum Input Voltage |
+16.00V |
| Maximum Input Voltage |
+24.00V (over-voltage protecting occurs at +24.00V) |
| Input Current Limit |
No |
| Reverse Input Protection |
No |
The recommended input voltages are 19V, 19.5V, or 20V.
Maximum Power Characteristics
| Output Rail |
+3.3V |
+5V |
+12V1 |
+12V2 |
+5Vsb |
-12V |
| Current Max |
12A |
12A |
16A |
|
2A |
0.05A |
| Regulation |
1.50% |
1.50% |
1.50% |
|
1.50% |
3.95% |
| Power |
99W |
192W |
|
10W |
0W |
| Total Power |
300W @+25°C |
Forced air ventilation is required for load larger than 180 Watts. For fanless or improper ventilation operation, de-rate the output current of each rails by at least 30%.
Cable Length
| ATX Cable |
1 x 350mm |
| EPS Cable |
1 x 400mm |
| PCIE Cable |
1 x 400mm (EPS), 450mm (PCIE) |
| SATA Cable |
1 x 250mm, 300mm, 350mm, 400mm (Molex) |
| DC Power Input |
1 x 380mm |
Connector Quantity
| ATX |
1 x 24Pin (20+4) |
| EPS (CPU) |
1 x 8Pin (4+4) |
| PCIE |
1 x 8Pin, 1 x 8Pin (6+2) |
| SATA |
3 x SATA, 1 x Molex |
| DC Power |
1 x DC IN (5.5x2.5), 1 x Molex Output (2x2) |
Additional Characteristics
| Model |
PWR-D19V300Fx |
| Switching Efficiency (VIN=19V) |
>94%, all rails combined, 50% load |
| Operating Temperature |
0°C to +65°C |
| MTBF |
200000 Hours |
| Net Weight (PSU + Cables) |
350 grams |
| PSU Dimension |
150mm (L) x 53mm (W) x 15mm(H) |
| Mounting Hole Spacing |
|
| Approvals |
No |
See the mounting hole diagram for detailed position of the mounting holes on board.
